500kg Vacuum Lifter Suction Cup Unloading Machine for Laser Cut

Product Description

Air Type Specification: (support customerized size)

Product Model :                                   XDL-100B3M-800B4M
Jib Column Size :                                3300x219x6mm
Rokcer Beam Size:                             4000x22mm
Suction Cup Equipment Size:           2000x1000mm
Cylinder Size:                                     1000x125mm
Color :                                                 Red/Orange/Blue/White etc
Working Area:                                    0~3200mm/0~4300mm
Stroke Lifter:                                      1100mm
Rocker Arm Rotation:                        0~270°
Max Steel Plate Size:                         1500mm*3000mm/4000x2000mm(customerized size)
Application:                                        Steel plate/aluminum plate/plastic plate/glass plate/stone plate/laminated particle board   
                                                              Moving and Lifting 
 

Pneumatic Tpye Vacuum Lifter
Model	Carne	Rocker Arm	Strok	Capacity	Max Workpieces	Air Pressure	Suction Pad (pcs/dia)
XDL-L100-B3M	3300mm	3000mm	100~1100mm	100kg	3000mm*1500mm	0.6~0.8Mpa	8pcs/200mm
XDL-L100-B4M	3300mm	4000mm	100~1100mm	100kg	3000mm*1500mm	0.6~0.8Mpa	8pcs/200mm
XDL-L300-B3M	3300mm	3000mm	100~1100mm	300kg	3000mm*1500mm	0.6~0.8Mpa	8pcs/200mm
XDL-L300-B4M	3300mm	4000mm	100~1100mm	300kg	3000mm*1500mm	0.6~0.8Mpa	8pcs/200mm
XDL-L500-B3M	3300mm	3000mm	100~1100mm	500kg	3000mm*1500mm	0.6~0.8Mpa	8pcs/200mm
XDL-L500-B4M	3300mm	4000mm	100~1100mm	500kg	3000mm*1500mm	0.6~0.8Mpa	8pcs/200mm

 


Air Type Vacuum lifter description

The Vacuum lifter plate suction crane is specially used for various plate processing and is suitable for loading and unloading of various processing machines. It has long-term cooperation with international and domestic laser cutting machine manufacturers.
1, Laser cutting machine, plasma cutting machine, shearing machine loading and unloading
2, Suitable for aluminum plate and stainless steel plate
3, Imported vacuum pumps and valves
4, Maximum load 2000KG
5, Accumulator and pressure detection ensure safety
6, Various structures and suction cup supply configurations
7,  Applicable to ceilings below 400 degrees
8,  The company passed IOS9001 and the products passed CE certification

Certificated 
 

Package & Delivery 


 

 

Vacuum lifter  Description 

 

 

1. The maximum load capacity of the vacuum suction cup crane is 2000KG.

The lifting size of the suction cup is 1.5m*3m (the maximum can be customized to 2m*6m).

2. A full range of oil-free vacuum pumps. The ratio between the vacuum pump and the suction cup is reasonably configured.

3. Safety is the first priority during the transportation of plates, so the full range of vacuum suction cup cranes are equipped with vacuum check valves to keep the plates in the adsorption state for several minutes without falling in the event of an accidental power outage.

4. The suction cup is equipped with spring support to meet the different degrees of deformation of the plate, ensuring that the plate is handled with care and does not scratch the plate.

5. The position of the suction cup can be adjusted to meet the lifting and transportation of plates of different formats.

6. The design and manufacturing comply with the German UW and international CE safety certification.

2. Instructions for use of vacuum lifter;

1. The power supply of the lifter is 220V AC, that is, one live wire and one neutral wire. When using it for the first time, connect the power cord to the power plug, and use one end of the 1-2 square 3+1 sheathed wire to connect the lifter power plug, where L connects to the live wire, N connects to the neutral wire, and one end connects to the power supply.

2. After starting the vacuum pump, push the handle slide valve to adsorb and release the suction cup and the plate

FAQ

1. Question: Are you a manufacturer or a factory?
A: Yes, we are a manufacturer with more than 20 years of experience.

2. Q: Do you accept special designs?
A: Yes, we accept the design and manufacture of products according to customers' special requirements.

3.Q: How is your package?
A: We usually use plywood boxes, but if you have special requirements, we can change and add special shipping marks.

4.Q: How long will it take you to ship the goods?
A: It depends on the product you need, but we guarantee to ship it as soon as possible. Usually, we will receive payment with in 5-10 days.
 

How to installation ?

1. Installation of the machine body:
1). Lift the column with a crane or forklift, adjust the position and height, align the 8 round holes on the column base with the 8 reserved bolts on the foundation, lay it flat, and tighten it with M20 nuts (with washers) to ensure reliable fixation. (As shown in the figure).
 

2. Use a crane or forklift to lift the rocker arm so that it is at the same level as the rocker arm fixing plate, align it with the threaded hole of the rocker arm fixing plate, and tighten it with M12 screws.

3, Connect the lift cylinder assembly to the rocker arm pulley and make the connection securely.


Debugging of pneumatic swing arm machine:

1). Adjust the air pressure to about 0.6-0.8MPa. The pressure gauge is located on the pressure reducing valve. The automatic drain valve at the bottom of the oil-water separation cup will automatically drain water when the air pressure is low.

2). Turn the [Up, Down] toggle switch on the control box to make the lift cylinder rise or fall. The lifting and lowering speed of the lift cylinder can be adjusted by adjusting the adjusting screw on the lift cylinder air pipe joint. The adjusting screw at the upper end of the lift cylinder controls the lifting speed of the lift cylinder, and the adjusting screw at the lower end of the lift cylinder controls the lowering speed.

3). Move the suction cup group to try to suck the board. Move the suction cup group to the board, turn on the [Suction Board] switch, and check whether the pressure of the vacuum pressure gauge can reach -0.04MPa. If it is lower than -0.04MPa, please check whether there is any leakage in the pipeline or switch. If it is higher than this value, it can be used normally.

Pneumatic rocker auxiliary control box function introduction:

[Open]: Suction cup assembly vacuum switch, flip the switch upward to start the vacuum system and suck the plate.

[Off]: The vacuum switch of the suction cup assembly, turn the switch down to turn off the vacuum system, and blow air into the suction cup to release the board.

[Up]: Control the switch of the lifting cylinder. Flip the switch upward, the lifting cylinder will rise, driving the suction cup assembly to rise.

[Down]: Flip the switch downward, the lifting cylinder descends, driving the suction cup assembly to descend.

Precautions before use

1). Operators must undergo special training and strictly abide by safety operating procedures.

2). Do not carry other objects except designated plates.

3). Do not carry plates weighing more than 500Kg.

4). Do not leave unattended loads in the air.

5). Regularly check whether each bolt fastener is loose. If loose, tighten it in time.

6). Connect the air source and adjust the air source pressure to 0.6-0.8MPa.

Founded in 2021, Taize Company is the leading manufacturer of vacuum conveying technology, production auxiliary equipment and stamping
peripheral equipment, and is committed to providing production solutions for industrial workshops.

Our product line includes vacuum conveying technology such as glass vacuum lifting, standard lifting, electric lifting and other standard or custom equipment, widely used in sheet metal, stone, wood, plastics and other fields; Stamping peripheral auxiliary equipment, such as automatic feeding, transmission, etc., is widely used in laser, sheet metal and other related industries.

Since the establishment of the company, through pragmatic, unremitting efforts; With high quality service and competitive price, the products are exported to the Middle East, Southeast Asia, Eastern Europe and other countries.

Our Products have pass CE, SGS, ISO and each machine use famous brand parts, such as AirTac, SNS etc. Taize machinery adhering to the quality of survival, integrity and development, service to create benefits of the business philosophy, adhere to the spirit of ingenuity as the basis of business, and strive to become China′s excellent mechanical automation solution provider.

We help our clients find the right product for each work scenario and application, thereby helping you reduce your workload, making your job safe, easy, and saving time and money.

Contact us for more information and we have our own design center which it can support different suitable lifter solution for partners based on different workshop requiremet.