Specification: (support customerized size)
Product Model : XDL-100B3M
Jib Column Size : 3300x219x6mm
Rokcer Beam Size: 4000x22mm
Suction Cup Equipment Size: 2000x1000mm
Cylinder Size: 1000x125mm
Color : Red/Orange/Blue/White etc
Working Area: 0~3200mm
Stroke Lifter: 1100mm
Rocker Arm Rotation: 0~270°
Max Steel Plate Size: 1500mm*3000mm/4000x2000mm(customerized size)
Application: Steel plate/aluminum plate/plastic plate/glass plate/stone plate/laminated particle board
Moving and Lifting
| Pneumatic Tpye Vacuum Lifter |
| Model |
Carne |
Rocker Arm |
Strok |
Capacity |
Max Workpieces |
Air Pressure |
Suction Pad (pcs/dia) |
| XDL-L100-B3M |
3300mm |
3000mm |
100~1100mm |
100kg |
3000mm*1500mm |
0.6~0.8Mpa |
8pcs/200mm |
| XDL-L100-B4M |
3300mm |
4000mm |
100~1100mm |
100kg |
3000mm*1500mm |
0.6~0.8Mpa |
8pcs/200mm |
| XDL-L300-B3M |
3300mm |
3000mm |
100~1100mm |
300kg |
3000mm*1500mm |
0.6~0.8Mpa |
8pcs/200mm |
| XDL-L300-B4M |
3300mm |
4000mm |
100~1100mm |
300kg |
3000mm*1500mm |
0.6~0.8Mpa |
8pcs/200mm |
| XDL-L500-B3M |
3300mm |
3000mm |
100~1100mm |
500kg |
3000mm*1500mm |
0.6~0.8Mpa |
8pcs/200mm |
| XDL-L500-B4M |
3300mm |
4000mm |
100~1100mm |
500kg |
3000mm*1500mm |
0.6~0.8Mpa |
8pcs/200mm |
Product Advantages
*SECURE
Damage-free gripping by using vacuum lifting.
*EASY TO USE
Simple operation, improve efficiency, Minimization of downtime due to employee injury.Increase in empioyee motivation, Only one person for handiing
*WIDE APPLICATIONS
Apply to fast and freguent lifting and moving ofworkpieces weighing to stone plate, class. metalaluminum,PVc plate, acric sheet and so on
*12 MONTHS
12months guaranteeall-round services
*MULTIPLE
Muitiple modes of energy supply plug-in and pneumatic suitable for most of the working environment
*MAX 500KG
Max capacity up to 500kg, can achieve most of light or heavy load workpieces loading and unloading tasks
Products show
how to install
1, Use a truck or forklift to lift the column, adjust the position and height, and align the eight round holes on the base of the column with the eight reserved bolts on the foundation. Lay them flat and lock them tightly with M20 nuts (plus gaskets). (as shown).
2,Use a crane or forklift to lift the rocker arm so that it is at the same level as the rocker arm fixing plate, align the screw hole of the rocker arm fixing plate and lock it with M12 screws.
3,the lifting cylinder assembly is connected to the rocker arm pulley and theconnection is firm.
4, The connection of pneumatic lines:
1),The rocker arm needs two pneumatic connections, one (red tube) is connected to the diamond palm with adsorption function through the pressure reducing valve, and the other (blue tube) is directly connected to the lifting cylinder.
2),Connect the vacuum tubes of each sucker group.
5, Debugging of pneumatic rocker arm loading machine:
1),Adjust the air pressure to about 0.6-0.8MPa. The pressure gauge is located on the pressure reducing valve. The automatic drainage valve in the lower part of the oil-water separation cup will automatically drain water when the pressure is low.
2), Toggle the [rise and fall] toggle switch on the control box, which can make the lifting cylinder rise and fall. The lifting and descending speed of the lifting cylinder can be adjusted by adjusting the adjusting screw on the lifting cylinder gas pipe joint. The adjusting screw at the upper end of the lifting cylinder controls the rising speed of the lifting cylinder, and the screw at the lower end of the lifting cylinder controls the falling speed.
3),moving the sucker group test suction plate. Move the sucker set to the plate, flip the [suction] switch, and check whether the pressure of the vacuum pressure gauge can reach -0.04MPa. If the pressure is lower than -0.04MPa, check whether the pipeline and switch are leaking. If the value is higher than this, it can be used normally.
Maintenance and maintenance of pneumatic rocker arm booster:
The mechanical components and control system of the equipment shall be maintained and maintained regularly. Before performing maintenance work and entering the operating area of the booster, ensure that the air pressure source is turned off and the air source connector is removed.
4.1 ,daily check:
1, check the pressure and air dryness of the air pressure source, and empty the water in the pneumatic twin; 2, check whether the vacuum generator is normal;
4.2, Weekly maintenance:
1. Wipe and clean the body of the machine, tighten the bolts of each part; 2, check the pressure of the air pressure source and the dryness of the air, filter the pressure reducing valve, drainage valve; 3, check whether the negative pressure sensor is normal;
4.3 Monthly maintenance:
1,wipe the dust on the power machine to ensure that the power machine is clean; 2,check whether the pneumatic plug is loose to ensure firm. 3,readjust the running speed of each action; 4,check whether there is damage to the gas pipe and the pressure of the air source and the dryness of the air, filter the pressure reducing valve, drainage valve; 5, Check whether the bolts in all moving parts are loose and tight, and add lubricating oil appropriately
First of all, thank you for choosing the pneumatic rocker arm booster produced by our company. The pneumatic rocker arm booster is a equipment independently developed by our company and applied to laser cutting machine sheet feeding. This manual describes the use of the pneumatic rocker arm booster. Please read and understand this manual carefully before using this device. Please check the packing list first to see if the accessories are complete. If anything is missing, please contact us as soon as possible. The machine has the characteristics of light structure, easy disassembly and assembly, wide use, etc., can carry 500KG load. This product has the following notable features: 1, high stability, simple operation. Using the principle of pneumatic power, only the operation of the control button can complete the workpiece handling. 2, high efficiency, short handling cycle. When feeding, the operator can control the movement of the workpiece in space with a small force and can stop at any position. The handling process is easy, fast and consistent. 3, high safety performance, set up air cut-off protection and automatic braking device. When the power supply suddenly disappears, the plate will remain in the original position for a period of time without falling. Easy for the operator to remove the plate. 4, the main components are well-known brand products, quality is guaranteed. This instruction manual describes the use method and precautions in detail. For better use and operation of the equipment, please read this instruction manual carefully and keep it properly before use.
){kind=link}